User's Manual

To install or replace the battery:

1. Remove the safety screw from the battery lid

2. Slide the battery cover following the direction of

the arrow

3. Remove the old battery if replacing it

4. Install new “AAA” (1.5V) battery according to

the correct polarity indicated, (+) and (-)

5. Put the battery cover back on until the latch

snaps in place

6. Place the screw back on the battery lid.

Precautions:

• Use only the size and type of battery specified

• Battery polarity must be inserted correctly for safe

and proper use. Reversed polarity may cause

damage to the device

• If the device will not be used for a long period,

remove the battery to prevent damage or injury

from possible battery leakage

• If battery leakage occurs and comes in contact

with skin, immediately flush affected area with

running water (not hot) and contact nearest

Poison Control Center