Smart Light Bulb User manual ① Please download Smart Life APP first You can scan the QR code, or search “Smart Life” from APP store, Android Market, Google play to download it.
② Open Smart Life to click “register” ③ Agree to the privacy policy.
④ Input your phone number or email to finish the registration ⑤ After the registration is done, click Log in
⑥ To log in, please input your mobile number/Email as well as the password, or you can also verify via SMS ⑦ Click Add Device after you successfully log in.
⑧ Click All to proceed.
⑩ Then you will be asked to confirm the bulb is flashing rapidly.
How to make the smart bulb flash rapidly? (EZ mode) 1. Connect the bulb to the power source. 2. Press the switch “on-off-on-off-on” continuously. 3. Then the smart bulb will be flashing quickly. How to make the smart bulb flash slowly? (AP mode) 1. Power on device. Power off after 10s then power on again. 2. Turn on-off-on-off-on continuously. 3. When the buld is now flashing rapidly, go to next step. 4. Operate again: On-off-on-off-on. Then the bulb will be flashing slowly.
⑪ Go on with Confirm light blinks rapidly ⑫ Enter the WIFI password at your place.
⑬ It is connecting now. ⑭ After the successful connection, you are able to rename the smart bulb.
How to use voice control of Amazon Echo to control your Smart devices? Step 1: Open the” Amazon Alexa”APP, click Skills
Step 2 Click Enable Choose smart life Enter smart life → →
Enter the account and password of Amazon Alexa Enter the account and password of Smart life →
Click Authorize Successfully done →
Using Google home to control smart bulb ① Go to homepage of Google home ② Choose “Home control” ③ Tap “+”
④ Choose “smart life” ⑤ Enter your smart life account and password.
⑦ Click to assigned rooms ⑧ Your device will be listed in the Home control page.
Voice command( Assume the name of the item is bedroom light 1. Alexa, turn on bedroom light. 2. Alexa, turn off bedroom light. 3. Alexa, set bedroom light to 100% 4. Alexa, set bedroom light to red/green/blue/yellow (Only works for RGB bulbs) Basic parameters Operating voltage: AC 85-265V Power: 7W Beam Angle: 120° Watt equivalent: 60W Wireless type: WIFI 2.4GHZ Wireless standard: IEEE 802.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
