User's Manual

7
Power the device through Micro USB cable. After powering on, the device will enter the
Zigbee Pairing Mode during the first use. The Wi-Fi LED indicator changes in a cycle of two
short and one long flash and release.
The device will exit the Zigbee Pairing Mode if not paired within 3mins. If you want to
enter this mode, please long press pairing button for about 5s until the Wi-Fi LED
indicator changes in a cycle of two short and one long flash and release.
3. Add Zigbee Bridge
Tap “+” and select “Zigbee Pairing”, then operate following the prompt on the App.
2. Power on
Sou nd Pair ing
Availa ble for e WeLin k suppo rt devi ces
Availa ble for G SM
and oth er devi ces
with QR code.
Available for camera
and other devices that
support this pairing
method.
Add D evice
All dev ices
Qui ck Pair ing
Sca n QR code
Available for Zigbee
conn ec ti on .
Zigbee Pairing
Shenzhen Sonoff Technologies Co., Ltd.
English