S31 User manual V1.
Specifications Model S31 Input 120V AC 60Hz Output 120V AC 60Hz Current 15A max. for general use Operating temps 0-30℃ Operating systems (Android 4.1 & iOS 9.0) or higher Wi-Fi IEEE 802.11 b/g/n 2.4GHz Material PC V0 Dimension 116mm(L)*70.4mm(W)*29.
Features S31 is a Wi-Fi smart plug with power monitoring that can be used to turn on/off devices from anywhere, schedule power on/off and share APP with your family to control.
2 Power on After powering on, the device will enter the quick pairing mode (Touch) during the rst use.the Wi-Fi LED indicator changes in a cycle of two short and one long flash. The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please long press the manual button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release. 3 Add the device Tap “+” to operate following the prompt on the APP.
Factory Reset Long press the pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long ash and release, then the reset is successful. The device enters quick pairing mode (Touch). Please reset the switch to factory defaults if you want to use other Wi-Fi networks, then reconnect the network. FCC Warning Changes or modications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Temperature: Operating Temperature 0~30℃ Shipping and Storage Temperature: -40℃ to 60℃ Use Method: Plug and Play Software Class: A Overvoltage Category: II Pollution Degree: 2 Protection against Electric Shock: Insulation-encased Class I Environmental: IP20 (NEMA 1) Automatic Action: Micro-disconnection (Type 1.
