User's Manual

ManualsBrandsShenzhen Sonida Digital Technology ManualsElectrical EquipmentSmart Desk Lamp

Instruction for Eye-Caring Smart Table Lamp

Thanks for purchasing our eye-caring smart table lamp. Please read the instruction carefully before

use. Product specification is the latest information at the time when this user manual is made. No

further notice will be made for any variation.

(Fig. I)

(Fig.II)

At first, the table lamp support is connected with the base and then a M4 bolt shall be screwed up

from the bottom of the base and then tightened with a phillips screwdriver. The installation is

completed if it is shown as the Fig. II.

Key quantity: switch/color temperature switching, 6 keys are for brightness control by sliding

itching.

② Power supply：AC100-240V-50/60HZ power adapter, DC-9V_2.5A output.

③ Wireless charging indicator has the red light on during the charging process. Neither red nor

Structural Function Diagram

Installation Step Schematic

Functional Description (fig. I)

Luminous zone of lamp panel

Support of table lamp

Axis of rotation

Support rod

Wireless charging area(optional)

DC power input interface

USB_DC output interface

Minimal brightness

Maximum brightness

6-level brightness adjustment key

On/Off key

WIFI indicator light(optional)

Wireless charging indicator

Timing button

Mode button of color temperature

Summary of content (5 pages)

PAGE 1
Instruction for Eye-Caring Smart Table Lamp Thanks for purchasing our eye-caring smart table lamp. Please read the instruction carefully before use. Product specification is the latest information at the time when this user manual is made. No further notice will be made for any variation.
PAGE 2
green light is on when the table lamp is not charged. During energization, red and green lights are on alternatively and the green light flickers in case of failure (only limited to the table lamp with wireless charging function). ④ 50HZ/60HZ-no stroboflash during photographing with mobile phone. Work Mode 1) On/off key: After the table lamp is POWERED, touch the on/off key for the first time, the red indicator light is on, and the table lamp is turned on.
PAGE 3
connection. (4) WiFi connection method: At first, scan the QR code below with a mobile phone to download the APP, application name: Smart Life After installation is completed, click on the application icon to enter into APP setting: Register a new account according to the prompt and login in. Upon login, click “Add Device” in “Home” interface. Afterwards, click “Smart Lighting” and “Lighting Devices” in “Add Devices” interface.
PAGE 4
3. Warm light and white light (1:1) 5000-5500K. Power of wireless charger (the function is optional) Material Adjustable angle for illuminance Product size Product weight Maximal 10W. Aluminium alloy metal support rod and plastic cement base Rotation along 180° 13.8cm*17.8cm*41cm About 791g Notice 1. Do not look at the light-emitting chip directly because of the strong light here. Looking at the strong light directly will cause damage to the eyesight! 2.
PAGE 5
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band.