User's Manual

IP DVR SERVER USER MANUAL
35
6 .7 . Record.
Saves images and event information to built-in IC memory.
6 .7 .1 . Record ( N orm a l Mode ) Cont en t .
Record menu can be divided into Normal mode and Event mode. Event mode is based on
conditions preset in ‘Event’ while Normal mode saves constantly, regardless of settings in ‘Event’
menu.
Recor d ( Norm a l Mode )
Video Source
Chose the video source to be used for saving. In case of M-PJEG, frame
rate also co be determined.
Changing of video source from MPEG-4 to M-JPEG or vice versa would
cause the deletion of recorded images from prior source used.
Motion Condition
Normal Mode will basically save constantly; however, user can only
save motions detected, by configuring the Record Method.
Motion detection configurations can be adjusted by changing the
motion condition, such as motion area and sensitivity.
Record Method
Motion Image Only: Save only images with motions.
Image Stream: Saves all images, regardless of motions.
Schedule Configure when to save and when not to save.