User's Manual

IP DVR SERVER USER MANUAL
3
Ter m inology De script ion
Camera Install Hole
To be used when connecting CCD to the server’s body and requires a
designated screw.
NETWORK
Indicates the status of network connection. If running on ‘DHCP’
network, LED will be on once IP is obtained successfully.
LIVE
If there is at least one user connected to the ‘IP DVR SERVER’, it will
indicate by flashing periodically.
LED
RECORD When it is saving to its built-in memory, it will flash periodically.
Preset
Returns back to factory default setting. Press and hold it down for 1
second or till all the LED indicators go off.
In Connects a condenser microphone or output signal of audio equipment.
Audio
Out Connects an active speaker (with built-in amp) or headset.
Video
Port for connecting to CCD camera. ‘IP DVR SERVER’ distinguishes the
difference between NTSC/PAL and performs accordingly.
75Ω
If video is connected along with external device concurrently, it allows its
user to choose to use 75Ω vertical resistance or not. If it is connected
without any external device connected concurrently, it must be ‘On’.
ETH 10/100
RJ-45 connector, for connecting network LAN cable. Comes with
auto-MDIX function, compatible with every kind of cable used in the
market today.
Green
On when power is being supplied to IP DVR SERVER and operating
normally.
LED
Yellow
Indicates the STATUS. If IP DVR SERVER stops to function, it will be on.
In other cases, it will use different methods to indicate.
RS485(-)
RS485(+)
RS485 connector for connecting PTZ equipment.
DI
Alarm input connector, connecting an external alarm device to the IP
DVR SERVER to be used along with GND connector.
DO Alarm output connector, to be used along with GND connector.
GND To be used along with alarm or power connector.
I/O
Terminal
DC 12/24 Connector, which provides power to connected camera.
DC 12/24V Power outlet.