User's Manual

IP DVR SERVER USER MANUAL
27
IP Address Enter the permanent IP address to be used.
Subnet Mask Enter the Subnet Mask per network group used.
Gateway Enter the Gateway per network group used.
DNS Server1
Static IP
DNS Server2
If a domain name is used in IP DVR SERVER setup, these
must be entered as well.
If Dynamic DNS address or SMTP for e-mail forwarding is
entered but DNS is missing, corresponding functions won’t
work correctly.
DHCP
User can check the IP address obtained from DHCP server. If
wireless connection is in use, user can refer to eth1
information as well.
Save
Saves the changed values. Must restart the system in order
for the new settings to be effective.
* Note
Description on security method for wireless connection.
z WEP(Wired Equivalent Protection)
 WEP-Authentication is only supported in Open System Authentication.
 WEP-KEY value is 5 characters for ASCII 64 bit, 13 characters for ASCII 128 bit, 10
characters for HEX 64 bit and 26 characters for HEX 128 bit.
z WPA-PSK/WPA2-PSK (Wi-Fi Protected Access – Pre-Shared Key)
 Key value will be 64 characters for HEX and between 8 and 63 characters for ASCII.