User's Manual

IP DVR SERVER USER MANUAL
10
Output
Pulse
Active/Inactive
Controls digital output.
Depending on configuration of Layout menu in SETUP, it’ll either
display Pulse or Active/Inactive button.
4 .1 .2 . Configur ing Pre set Va lue for PTZ.
(１) Click on ‘Preset Position Setup’.
(２) You can set, clear or go to the preset position. Please refer to instruction given below for how
to do so.
- Set: Please move the PTZ device to desired location first then choose ‘set’ and click on a
desired position button.
- Clear: Choose ‘clear’ and click on desired position button.
- Go to: Choose ‘goto’ and click on desired position button.