Product Diagram

Ｉ ＳＥＤＣ Ｓｔ ａｔ ｅｍｅｎｔ ：
Toupholdnetworkprotectionstandardsandensurecompliance,allactivecellulardevicesmustmaintain
aseparationdistanceofatleastsixfeetbetweentheinsideunitantennaandoutsideunitantennaandat
leastfourfeetofseparationdistancefromtheinsideunit.Useonlythepowersupplyprovidedinthis
package.Useofanon‐SolidRF productoraccessorymayresultindamagetotheequipmentor
components of the equipment. The inside unit is designed for use in an indoor, temperature
‐
controlled
SafetyGuidelines
components

of

the

equipment.

The

inside

unit

is

designed

for

use

in

an

indoor,

temperature
controlled

environment(lessthan100degreesFahrenheit).Itisnotintendedforuseinatticsorsimilarlocations
wheretemperaturesmaybeinexcessofthatrange.
RFSafetyWarning:Anyantennausedwiththisdevicemustbelocatedatleast8inchesfromallpersons.
CPC‐2‐1‐05—ZoneEnhancers‐ Spectrummanagementandtelecommunications
http://www.ic.gc.ca/eic/site/smt‐gst.nsf/eng/sf08942.html
Mobile phone is the minimum distance to use indoor antenna
Inside server antenna types Minimum separation distances D (m)
Ceiling mounted (e.g., dome‐type) antennas 2
Wall mounted (i.e., panel or other type)
antennas
1.0 or 2*
Table top antennas 1.0
ISED