Safety Guide

Step 4: Temporarily Mount the Outside Antenna

Use one of the tow options to mount the outside antenna on your roof on the side of

the house with the strongest signal

In order to achieve the best signal coverage effect,

there is a certain distance requirement between the

indoor and outdoor units. Make sure the inside and

outside units are facing away from each other.

Minimum Required Separation Distance Between

Indoor and Outdoor Antenna：

45 ft (15 meters) horizontal distance

6 ft (2 meters) vertical distance(As far as possible)

Make sure to meet the Minimum Separation

Requirements while at the same time mounting the

outside unit in the location with the strongest signal.

Caution

Step5: Connect the System

1. Connect the outside antenna to the 15

feet RG11 cable, fix the connector(In order

to avoid internal damage of the antenna

connector due to gravity or pulling the cable)

Secure the cable near the antenna

to prevent cable damage caused by

wind shaking