Safety Guide

To uphold network protection standards and ensure compliance, all active cellular devices must
maintain a separation distance of at least six feet between the inside unit antenna and outside
unit antenna and at least four feet of separation distance from the inside unit. Use only the power
supply provided in this package. Use of a non-SolidRF product or accessory may result in
damage to the equipment or components of the equipment. The inside unit is designed for use in
an indoor, temperature-controlled environment (less than 100 degrees Fahrenheit). It is not
intended for use in attics or similar locations where temperatures may be in excess of that range.
Safety Guidelines
RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all
persons.
FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL BOOSTER WITH YOUR WIRELESS PROVIDER,
PLEASE SEE BELOW:
Sprint: http://www.sprint.com/legal/fcc_boosters.html
T-Mobile/MetroPCS: https://support.t-mobile.com/docs/DOC-9827
Verizon Wireless: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html
AT&T: https://securec45.securewebsession.com/attsignalbooster.com/
U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp
16
If you have any questions or concerns when installing or operating your cell phone booster,
please email us at
US: [e-mail]
Canada: [e-mail]
Or call our customer service number
Office [phone]
Toll Free [phone]