Safety Guide

Step10: Finalizing and Securing Cable Route
• Find the best route for the cable. Follow the lines of your home to hide the
cable in eaves or between the soffit and the exterior wall.
• If needed, cable clips can be purchased at most hardware stores.
11
Mount the booster: Keep away from heat and don't cover booster
Booster will about 30 degrees Fahrenheit higher than the ambient
temperature, which is a normal phenomenon.
• Whether the cable is properly secured is
very important for the entire system. In
most cases, the customer found that the
booster did not work after working for a
period of time because the cable was
not installed securely.
• Carefully arrange the cable along the
outside of the building and ensure that
there are no folds or kinks. Fix the cable
at each corner
Step9: Finalizing Booster Installation