User's Manual
7
3.2 structure
3.2.1 cooling
The overall structure and the floor flats and combinations。The bottom、Cover for the metal aluminium
material,Heat dissipation good。Internal electroplating metal layer,Can effective signal, shielding。
3.2.2 appearance
3.2.3 installation
Add install board, wall hung installation
3.2.4 Interface and function is introduced
1. The indicator:Green light;
2. Status indicator:Red light,When the power output full UP(850M UP End and the 1900M
UP end)Or equipment of self-excited will light on;
3. Power source:The input power;
4. Gain selected switch:The switch has three gear,H is gap not attenuation,L for 20 dB
attenuation、M for 10 dB attenuation;
5. Power amplifier state selector switch:The switch has two gear,On one side is normal mode,
On one side is energy-saving mode(When there is no users will greatly reduce the power
consumption of the call
)
6. USB+5V: Only as the USB interface charging terminal use。