User's Manual
Table Of Contents
- 1.Introduction
- 2.Product Description
- 3.Indications for Use
- 4. Package Contents
- 5. Features and Benefits
- 6.Specifications
- 7.Operating Procedure
- 7.1 Product indication and key function
- 7.2 OLED screen description
- 7.3 Specific operation method
- 8.Changing the O-Ring
- 9.Attention
- 10.FCC Caution
- 11. Device Label
- 12.Label Symbols Defined
- 13.Prevention of Cross-Contamination
- 14.Troubleshooting
- 15.Manufacturer Warranty, Service and Support
- 16.Magnetic compatibility information
- Guidance and manufacturer´s declaration – electrom
- Guidance and manufacturer´s declaration – electrom
Min I(Smart) User Manual
4
7. Operating Procedure
7.1 Product indication and key function
Serial number
Name
Function description
1
Music settings key
After long press to enter the setting state, click to adjust the music
sound
2
Injection mode setting
key
After the long press to enter the set state, click to switch to speed
mode
3
Charge Indicating
Lamp
It is used to indicate the charging state. Green flashes when charging
normally
4
OLED Dispaly Screen
OLED
Used to display working status and instructions
5
Work Indicating Lamp
ndicate that the push rod is working, flashing when working normally
6
CautionIndicating
Lamp
It is used to indicate that the injection site is periodontal membrane
or the injection is finished, and it lights up when prompted
7
Power / switch key
Long press is used to switch on and off the machine, short press is
used to unlock and lock
8
Booster tube
Used to fix local anesthetic bottle
9
Start work key
Touch the area with your finger to get the push rod to work,Raise
your hand and suck back