Make Something Wonderful Three years ago, when we were designing the Snapmaker Original, we broke the rules of traditional desktop 3D printers and created the first modular 3-in-1 3D printer on the market.
Happy Making Modular System This machine is built for innovators. Our goal is to assist you to make the world a better place with a machine we built with love. The difference could be something as small as a Christmas gift, or something as ambitious as exploring unknown territories of our mankind. Dream big and make it happen. Snapmaker is not only a 3D printer, but also a powerful machine that you can modify with all kinds of addons.
CONTENTS BEFORE YOU START 01 12 38 56 72 Before You Start Machine Assembly 3D Printing Laser Engraving and Cutting CNC Carving Quick Start Guide | 1
Before YouStart 1.1 Disclaimer Please read and understand the contents of the manual of this product carefully. Failure to read the manual may lead to personal injury, inferior results or damage to the Snapmaker products. Always make sure that anyone who uses this product knows and understands the contents of this manual to make the most out of it. This manual is provided for reference purposes only, we do not warrant the accuracy or completeness of the information provided by this manual.
Before YouStart Stop using this product if any of the following occurs. Turn off the machine immediately. - There is a fire in this machine which persists after the machine turns off. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. - The machine stops unexpectedly.
Before YouStart 1.4 Labels on Your Snapmaker Safety Labels Hazard Hot surface 1.5 Specifications Warning Location Taking care to avoid On the 3D Printing contacting with a hot Module, Print Sheet surface. and Heated Bed Taking care to avoid injury Sharp elements from sharp elements (e.g. On the CNC module General Frame Material Aluminum Alloys Connectivity Wi-Fi, USB Cable, USB Disk Touchscreen 5”TFT, Android System Software Snapmaker Luban.
Before YouStart 1.
Before YouStart 1.7 Video Tutorials We provide both the video tutorials and Quick Start Guide which help you get started. You can either read this Quick Start Guide to finish assembly and begin your maker journey, or watch the video tutorials at https:// Tool Box snapmaker.com M4 x 30 Screw x12 M4 x 10 Hex Socket Head Screw x 17 M4 x 8 Screw x68 M4 x 10 Hex Flat Head Screw x 22 M4 x 70 Screw x4 Wing Nut x 4 Foot x 4 + M4 x 10 Hex Socket Head Screw x 4 ER11 Collet (Only for 3.
Machine Assembly MACHINE ASSEMBLY 12 | Quick Start Guide | 13
Machine Assembly 02/22 01/22 Attach the feet to the Base Plate. Make sure the sliders are aligning with each other. If not, you can move them to the same position as illustrated. Please hold the linear modules carefully to prevent them from falling. 1 2 DONE! M4 x 10 Hex Socket Head Screw x 4 Foot x 4 Linear Module x 2 Base Plate x 1 Do not press the steel strip.
Machine Assembly 03/22 Attach the Platform to the Y axes. Do not tighten the screws until Step 5. M4 x 8 Screw x 8 04/22 Attach the Y axes to the Base Plate. M4 x 8 Screw x 16 Make sure to assemble the Platform in correct orientation. Platform x 1 Make sure the Y-Axis Linear Modules are accurately mounted onto the grooves of the Base Plate.
Machine Assembly 05/22 Tighten the screws on the Y-axis sliders. 06/22 Attach the Z-Axis Holders to the Base Plate. Z-Axis Holder x 2 M4 x 8 Screw x 8 If the screws on the sliders are not aligning with the screw holes on the Base Plate, please move the Platform to the proper position.
Machine Assembly 07/22 08/22 Attach the Touchscreen Holder to the Base Plate. Thread the connecting cables through the holes of the holders, then attach the Z axes to the Z-Axis Holders. Do not tighten the screws until Step 12.
Machine Assembly 09/22 Install the screws to the bottom of the Z axes. Do not tighten the screws until Step 13. 10/22 Inthemidlinedirection,manuallymovethePlatformtothepositionasillustrated. Then move the Z-axis sliders to the lowest position that they can reach.
Machine Assembly 12/22 11/22 Attach the X axis to the sliders on the Z axes. Tighten the screws that are used to attach the Z axes to the Z-Axis Holders.
Machine Assembly 13/22 Tighten the screws to the bottom of the Z axes. 14/22 Put your hands at each end of the linear module, then move the X axis to the top. Make sure both ends of the linear module are in horizontal alignment with each other throughout the process.
Machine Assembly 15/22 Locate the Y Conversion Cable and the Y-axis connecting cables as illustrated, then connect them to the Converter. 16/22 Attach the Y-axis converter to the Base Plate.
Machine Assembly 17/22 Locate the Z Conversion Cable and the Z-axis connecting cables as illustrated, then connect them to the Converter. 18/22 Attach the Z-axis converter to the Base Plate. Converter x 1 Z Conversion Cable x1 M4 x 30 Screw x 4 You can use the provided Cable Tie to organize the cables.
Machine Assembly 19/22 20/22 Attach the Controller to the Z axis. Open the dust plugs, then connect the X, Y and Z axis to the Controller. Toolhead Add-on 1 X Axis Y Axis Z Axis Make sure the connectors are in the right direction. Add-on 2 Add-on 3 Heated Bed Power Screen USB M4 x 30 Screw x 4 Controller x 1 Keep the protective dust plugs on the unplugged connectors. Dust accumulation may seriously affect the performance of the Controller.
Machine Assembly 21/22 Place the Touchscreen, then connect the Touchscreen to the Controller. 22/22 Connect the cables for the Power Module. Do not connect or disconnect any cables when the machine is powered on. AC Power Cable x 1 Touchscreen x 1 Power Module x 1 DC Power Cable x 1 Make sure the power switch is in the Offposition.
Machine Assembly Absolutely amazing! You have successfully assembled the machine body, just select one function to complete the assembly and bring your first job into the world! 36 | 3D Printing Laser Engraving and Cutting CNC Carving PAGE 38 PAGE 56 PAGE 72 Quick Start Guide | 37
3D Printing 3D Printing 3.1 Assembly 3.1.1 Assemble the 3D Printer 3.1.2 Initial Setup 3.2 Get Started 3.2.1 Calibrate the Bed 3.2.2 Load Filament 3.3 Start Printing 3.3.1 Prepare the G-code File 3.3.2 Start Your First Print 3.3.
