User's Manual

III
www.newsmartsafe.com iSmartLink 801 User Manual
IMPORTANT SAFETY INFORMATION
DANGER
When an engine is operating, keep the service area well-ventilated or attach a
building exhaust removal system to the engine exhaust system. Engines produce
various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.)
that cause slower reaction time and result in death or serious personal injury.
WARNING
Read all safety warnings and instructions.
and/or serious injury.
1. Always perform automotive testing in a safe environment.
2. Do not connect or disconnect any test equipment while the ignition is on or the
engine is running.
3. DO NOT attempt to operate the tool while driving the vehicle. Have second
personal operate the tool. Any distraction may cause an accident.
4. Before starting the engine, put the gear lever in the Neutral position (for manual
transmission) or in the Park (for automatic transmission) position to avoid injury.
5.
liquids, gases, or heavy dust.
6.
7. Wear an ANSI-approved eye shield when testing or repairing vehicles.
8. Put blocks in front of the drive wheels and never leave the vehicle unattended
while testing.
9. Use extreme caution when working around the ignition coil, distributor cap,
ignition wires and spark plugs. These components create hazardous voltage
when the engine is running.
10. To avoid damaging the tool or generating false data, please make sure the
vehicle battery is fully charged and the connection to the vehicle DLC (Data Link
Connector) is clear and secure.
11. Automotive batteries contain sulfuric acid that is harmful to skin. In operation,
direct contact with the automotive batteries should be avoided. Keep the ignition
sources away from the battery at all times.