User's Manual

16
iSmartLink 801
1. Locate vehicle’s DLC socket.
2. Plug the VCI dongle into the vehicle’s DLC socket (It is suggested to use the OBD
II extension cable to connect the VCI dongle and DLC socket).
4.3 Communication Setup
There are 2 ways available for the tablet to communicate with the VCI dongle:
BT(wireless) communication and USB cable connection. User can choose either of
the following ways to establish communication.
4.3.1 Pairing up via Wireless (BT) Communication
After the sign-up is successfully completed, the Bluetooth communication between
the tablet and the VCI dongle is automatically established and user has no need to
4.3.2 USB Cable Connection
1. Connect one end of the included data cable to the Data transmission port of the
VCI dongle.
2. Connect the other end to the USB expansion slot of the tablet. The power LED of
the VCI dongle will light up.
Note: The USB connection provides the most stable and fastest communication. When
both the communication methods are applied at the same time, the tablet will use the USB
communication as the default priority.