User's Manual

iSmartLink 801

3 Initial Use

3.1 Charge The Tablet

Follow the steps below to charge the tablet:

1. Connect one end of the charging cable to the USB socket of the power adapter.

2. Connect the other end to the charging port on the bottom of the host.

3. Plug the charger power plug into a power outlet to start charging.

When it displays

the charging is completed.

Notes:

• It is normal that the tablet won't turn on when charging because the battery has not been

used for a long time or it is exhausted. Please turn on the tablet again after charging the

battery for a while.

• Please charge the tablet through the charger in the package. We assume no responsibility

for damages and losses caused by charging with chargers other than those included with

the package.

• The battery can be recharged repeatedly. However, as the battery is wearable, the standby

time of the device will be shortened after long-time use. Please avoid frequent repeated

charging so as to extend battery life.

3.2.1 Power on

Long press the POWER button and then the start interface will appear.

Long press the POWER button until the dialog box pops up, and tap Shutdown to

Restart to reboot it.

3.3 Wi-Fi Setup

The tablet has a built-in Wi-Fi communication module. Once you’re online, you can

email on your network.