User's Manual

CAT-601S Auto Transmission Cleaner and Fluid Exchanger User’s Manual
4
3. Pipeline diagram
The pipeline diagram is as shown in Fig.3.
Fig.3
1-Pump; 2,3,15,23-Three-way solenoid valves; 4-Fluid filling port; 5-New fluid tank; 6,8-Electronic scales; 7-Detergent
container; 9- Used fluid tank; 10,17-Filters; 11- Fluid path identifier; 12,18- Pressure gauges 13,14- Sight indicators;
16-Two-way solenoid valve; 19- Check valve; 20- Ball valve for fluid draining; 21- Temperature sensor; 22- Old oil sampling
valve.
4. Circuit connection diagram
The circuit connection diagram is as shown in Fig.4.
Fig.4
J8 To solenoid V2 J25 To unit serial port cable
J12 To solenoid V1 J14 To temperature sensor
J17 To solenoid V3 J15 To used fluid tank sensor
J22 To solenoid V4 J16 To new fluid tank sensor
J78 To solenoid V5 ATN1 To Bluetooth antenna
J21 To oil pump J13
To key-press film
J24
To switch power supply
J33
To VGA display and drive module
J26
To printer power supply
J3
Test port, used by SMARTSAFE only
J23 To printer data cable J4 To sight indicators for used & new fluid