User's Manual

5 6
4.2 Baby unit overview:
MIC
Light sensor
Infrared LEDs
CMOS sensor
Speaker
Pair key
USB-Jack
Temperature
sensor
4.3 ICONS OVERVIEW:
---- Signal
----- Volume
---- Brightness
---- Alarm
---- Lullaby
------ ECO
---- Camera
---- Baery
----- Zoom
------ Talk to baby
— Temperature
28℃
----- Night vision
ECO
5. PLACEMENT OF THE BABY MONITOR:
Aim to provide the viewing area: Select a locaon for the camera that
provides a clear view of the area you want to monitor, which is free
from dust, and is not in line-of-signt to a strong light source or direct sunlight.
Avoid installing the camera where there are thick walls or obstrucons
between the camera and the monitor.
STRANGULATION HAZARD--keep cord out of child’s reach. Never place
camera or cords within 3 feet of crib or playpen. NEVER use extension cords
with AC adapters. only use the AC adapters provided.
6. Using the baby monitor
6.1 TURN ON THE BABY UNIT:
*Only use the A/C adapter included in this package (5V, 700mA);
Use the provided AC adapter to connect the wall outlet with the baby unit;
Once the adapter connects then the unit will turn on automaclly and the
power LED will light up.
6.2 TURN ON THE PARENT UNIT:
*Only use the A/C adapter included in this package (5V, 700mA);
*The parent unit is supplied with a built-in rechargeable Li-ion baery.
We suggest to connect the monitor to the adapter plugged into the mains
whenever possible, in order to keep the baery charged;
Press and hold the power key on the Front side of the parent unit;
Once parent unit turned on , the power LE D will light up and the image will
display on the LCD screen;
7.0 OSD MODE OPERATION
7.1 PARENT UNIT SCREEN ON/OFF
Short press the power key to turn on / off the screen.
7.2 VOLUME ADJUSTMENT
Press the Right key to increase the volume;
Press the Le key to decrease the volume;
7.3 DIGITAL ZOOM & PAN / TILT
Press Zoom key to operate Zoom in / out;
At the Zoom mode , press the navigaon key to Pan/Tilt the image;
During digital zoom mode, the zoom icon will be displayed on the top
of screen.
Warm reminder: If you want to adjust the volume/Brightness, you have to
exit the Zoom mode before your operate it.