User's Manual
7.4 CAMERA VIEW / SCAN
(only have paired two or more cameras have this funcon)
Press OK key to view / scan camera;
During scan mode, the scan icon will be displayed on the top of screen.
And each cameras' video will be stay on the LCD around 10 seconds then
change to next camera;
7.5 TALK TO BABY
To talk, press and hold the talk key on the front of the monitor.
Release the buon when you have finished talking to listen to the sound from
the baby's room again . Bear in mind that you can't listen to your baby whilst
you're talking to them; to listen to it, you will have to stop pressing this buon.
7.6 INFRARED NIGHT VISION(Automac)
The infrared night vision funcon allows the camera to pick up images of your
baby or the monitored area in dark or low light condions.
In this mode, only black and white images will be displayed on the monitor ,
the opmum image is 6 feet distance between baby unit and object.
8. MENU OPERATION
8.1 ECO SETTING
This mode allows you to control the sound acvaon of your baby monitor.
The ECO default seng is OFF. If there is no sound around the camera within
30 Seconds, it will stops transming.
The monitor screen turns off when the camera is not transming.
When the camera detects the sound is louder than set sensivity level it
will start transming the signal to the monitor again.
To change the ECO level, please follow the next instrucons:
1. Press the Menu/Eixt key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the the ECO icon is
highlighted then press OK key to enter into the sub-menu;
3. Press the LEFT key or RIGHT key to select desired level;
EC O
7 4
2. WARRANTY TERMS
We take quality very seriously. This is why all of our products come with a
one year warranty from the original purchase date against defects in
workmanship and materials. If you have warranty or support issues please
contact the store where you purchased , or contact the Amazon seller.
3. Important guidelines for installing your baby monitor.
*To use your parent unit and baby unit together, you must be able to
establish a radio link between them, and the range will be affected by
environmental condions.
*Any large metal object, like a refrigerator, a mirror, a filling cabinet,
metallic doors or reinforced concrete between the baby and parent unit
may block the radio signal.
*The signal strength may also be reduced by other solid structures,
like walls, or by radio or electrical equipment, such as TV, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
*Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers),
Bluetooth systems, or microwave ovens, may cause interference with this
product, so keep the baby monitor away at least 5(1.5m) from these types
of products, or turn them off if they appear to be causing interference.
4. PRODUCT OVERVIEW
4.1 Parent unit overview:
Power & Charging L E D
Volume L E D
Power key
Zoom
MIC
Talk to baby
V+ / Right key
Menu/Exit
OK & Scan
V- / Left key
3.2 L CD S creen
Speaker
Reset key(under stand)
DC-jack