User's Manual

Thank you for purchasing this baby monitor . We will try to give you the
best products and service .
Congratulaon!
Now you can take care of your babies anywhere and anyme ! Please read
the user manual before you use !
Please retain your original dated sales receipt for your records.
For warranty service of your baby monitor, you will need to provide a copy
of your dated sales receipt to confirm warranty status. Registraon is not
required for warranty coverage. Before you use the product,
we recommend you to fully charge the baery in the parent unit, so that
it connues to work if you disconnect it from the power supply to carry it
to another locaon. Please read the Safety instrucons.
Please make sure you have the following in this packing.
1. Parent unit x 1;
2. Baby unit x 1;
3. Adapter x 2;
4. User manual x 1;
1. SAFETY INSTRUCTIOINS :
CAUTION: Keep small parts away from children.
Strangulaon Hazard: Children can become entangled in cords.
Power cords should be kept more than 3 feet away from the crib and
baby's reach all the me.
Baby monitors and cameras with power cords should never be hung on or
near the crib. This product is not a toy and should be kept out of children's
reach.
This product contains small parts. Exercise care when unpacking and
assembling he product.
Read and keep instrucons: All the safety and operang instrucons
should be read before the video baby monitor is operated.
1 10
Rechargeable
baery for monitor
Model:503450;
3.7V, 950 mAh, 3.515Wh ;
Operang me with
baery fully charged
(parent unit)
Up to 12 hours (ECO on)
Image sensor type
1/6.5'’ Color C MOS image sensor
IR LED Type
940 nm
FCC ID
RX:2AKVZ-SM32RX;
TX:2AKVZ-SM32TX
10. TROUBLE SHOOTING
No recepon on
the monitor
*The power adapters may not be properly
connected;
*Confirm that the camera and monitor are ON;
*Camera may be far away from the monitor;
*Camera and monitor may not be properly
paired; follow PAIRING instrucons;
*Restart Baby unit and Parent unit;
*Press the reset key at the back of Parent unit;
Interference or
poor recepon
*Move the monitor close to the camera;
*The camera or monitor may be placed too close
to many metal objects;
*Other electronic devices may be interfering
with the signal;
*The baery power may be too low;
*Restart Baby unit and Parent unit;
*Press the reset key at the back of Parent unit;