Users Manual

contact is consistent.
4. The Receiver should fit snugly, yet loose enough to allow one finger to fit between the strap
and your dog's neck (C).
5. Allow your dog to wear the collar for several minutes then recheck the fit. Check the fit again
as your dog becomes more comfortable with the Receiver.
6. How to attach the collar to the Receiver ?
CAUTION：
Risk of Skin Damage. Too long time or too tight fitting may cause pressure necroses, which if ofen
misidentified as burns. Please follow below instructions:
-Do not shave the dog's neck as this may increase the risk of skin irritation.
-Do not leave the Receiver on your dog’s neck for continuous 12 hours.
-Never attach leash to the collar.
-Never fit the Receiver too tight to your dog’s neck.
V. Pairing Up（配对）
If you feel the Receiver is not responding to the Remote Transmitter, follow these steps to pair
them up.
1. Press and hold the power button on the Receiver for 2 seconds to turn it on and toggle up
the On/Off button to turn the Remote Transmitter on.
+按接收电源键的图示 和 +接收器开机的图示
2. Press the power button on Receiver 3 times to enter the pairing mode. You will hear a
Warning Tone and the indicator become solid. You will now have 10 seconds to finish the pairing.
+按 3 次接收器电源键的图示
3. Press the Warning Tone button, Vibration button or Shock button on the Remote Transmitter,
and Receiver will respond correspondingly indicating that pairing process is completed.
+按遥控器声音、电击、震动任意按键的图标+接收器做对应反馈的图标