Users Manual

Transmitter.
+展示打开遥控器开机按键图片
Turn on the Receiver by pressing and holding the Power Button for 2 seconds.
+展示按压接收器电源键的图片
III. Training Modes（功能演示/测试）
1. Warning Tone Mode
Press the Warning Tone button and Receiver will deliver a warning tone. It will cut off
automatically if you press and hold the Warning Tone button for 10 seconds. There are total 8
levels of Warning Tone for training which you can adjust by the Adjustment button.
+操作声音按键的图片+调节按键的图片
2. Vibration Mode
Press the Vibration button and Receiver will deliver a vibration. It will cut off automatically if you
press and hold the Vibration button for 10 seconds. There are total 16 levels of Vibration for
training which you can adjust by the Adjustment button.
+操作震动按键的图片+调节按键的图片
3. Shock Mode
Press the Shock button and Receiver will deliver a static shock. It will cut off automatically if you
press and hold the Shock button for 10 seconds. There are total 18 levels of Vibration for training
which you can adjust by the Adjustment button.
+操作电击按键的图片+调节按键的图片
4. Switching Channels
Press the Channel button to chose the Receiver you want to control if you have paired up two
Receivers.
+按频道键切换频道的图片
IV. Fitting the Receiver（穿戴）
Important:
The proper fit and placement of your Receiver is important for effective training. The Contact
Points with Conductive Silicone Cover must have direct contact with your dog's skin on the
underside of his neck. To assure a proper fit, please follow these steps:
1. Make sure that the Receiver is turned off.
2. Have your dog standing comfortably (A).
3. Place the Receiver on your dog's neck close to the ears. Center the Contact Points underneath
your dog's neck, touching the skin.
Note: It is sometimes necessary to trim the hair around the Contact Points to make sure that