Users Manual

4. Immediately give the "Sit" command while continuing to hold
the function button / / .
5. Release the function button / / as soon as your pet is in
position, and praise him.
6. Release your pet from the "Sit" command and play.
7. Repeat Steps 2 through 6.
Note: If your pet breaks
the "Sit " command, repeat
steps 3 through 6. Keep
your pet close to you while
teaching the "Sit " command.
The "Come" Command
1.Put a separate, non-metallic collar on your pet’s neck ABOV E
the Receiver Collar, and attach a 10ft leash. Note: Be sure the
extra collar does not put pressure on the Contact Points.
2.Hold your leash in one hand and the Remote Transmitter in the
other.
3.Wait for your pet to walk away from you. Using the Recognition
Level for your pet, press and hold the function button / /
on your Remote Transmitter.
4.Immediately give the command "Come" while continuing to hold
the function button / / .
5.Using the leash, gently guide your pet towards you until he
begins to come in your direction.
6.Immediately release the function button / / as soon as
your pet steps towards you, and praise him enthusiastically.
7.Quickly move backwards as your pet begins to come back to
you, praising him the entire time.
8.Praise your pet when he returns to you.
9.Repeat Steps 3 through 8.
10.Once your pet responds readily to the "Come" command
several times, back away from him without giving a command.