User's Manual

1.Press / / once to send a vibration,shock and
beep command to Receiver Collar.
2.Press and Hold / / ,Receiver Collar will have a
consecutive vibration,shock and beep and stop after 10
seconds.
Notes: Do not suggest to press and hold / for
a long time to avoid physical or psychological hurt to
your pet.
3.Press the Stimulation Button to select / , roll
to select the shock or vibration level. You can press
any one of / / to conrm the level, or wait 10
seconds without operation on .
Notes: / icon will blink when you press ,and will
stop blinking when you press any button( / / ) or
there is no operation on for 10 seconds.
Notes: the level of beep mode can NOT be adjusted.
Level 0 is set by default.
4.When shock level is set from 001~020 or display shows
shock mode icon, the Remote Transmitter delivers the
shock command instantly after pressing the button.
Advanced Shock protection mode:
If the shock level is set from 021~100, and Remote
Transmitter is displaying / , the first press on Shock
Button will not deliver the shock command to Receiver
Collar in order to remind user to conrm the shock level, it
will deliver the command on the second press. Its Pet
Protection Control, avoiding delivering over shock to your
pet.