Dog Training Collar User Manual
•Examine the contact area daily for signs of a rash or a sore. •If a rash or sore is found, stop using the collar until the skin is fully healed. •If the condition persists beyond 48 hours, see your veterinarian. These steps will help to keep your pet safe and comfortable. Millions of pets are comfortable while they wear stainless steel contacts. Some pets are sensitive to contact pressure. You may find after some time that your pet is very tolerant of the collar.
Channel 1 Channel 2
Press and Hold the power button for 3 seconds, the Receiver Collar will vibrate and BLUE LED indicator becomes solid then blinking. The Receiver Collar will be into sleep mode if there is no movement within 2 minutes. Any movement will activate the Receiver Collar.
1.Press / / once to send a vibration,shock and beep command to Receiver Collar. 2.Press and Hold / / ,Receiver Collar will have a consecutive vibration,shock and beep and stop after 10 seconds. Notes: Do not suggest to press and hold / for a long time to avoid physical or psychological hurt to your pet. 3.Press the Stimulation Button to select / , roll to select the shock or vibration level. You can press any one of / / to confirm the level, or wait 10 seconds without operation on .
4.Connect the USB cable port to the power adapter, power bank or your PC. Notes: Remote Transmitter: Fully charged, the Green LED indicator will become solid. Receiver Collar: Fully charged, the Blue LED indicator will become solid. The charging time takes 2~3 hours, Red indicator on Remote Transmitter and Blue indicator on Receiver Collar will blink slowly when charging.
