User's Manual

L SERIES IP CAMERA USER MANUAL
4
Cube camera
5V
√
√
√
√
Built-in
Notice:
 Please check carefully if all listed items are included in the package, if anything
missing, please contact vendor in time.
2 Installation guide
2.1 AP connection
Power on the camera (Please check carefully output voltage of power adapter, don’t
insert incorrect adapter, otherwise it will damage the camera), after 2 minutes, the
camera works normally. You can use PC or mobile phone to connect directly the camera
by WiFi, as Figure 1.
Figure 1
1) Turn WLAN on in PC, and search available SSID, if searched AP SSID in device
label, then you can connect it, default password is 123456789.
2) After connecting the camera, it will assign IP address to PC( PC wifi IP address need
to be set to obtain automatically).
3) Open browser in PC, enter IP address of camera(AP default IP address is
192.168.9.1）then you can visit the camera(refer to 2.2).
Note: Please check the user manual of mobile phone software when you connect to the
camera by mobile phone.
2.2 Wired connection to LAN
Power on the IP camera, connect IP camera to router by network cable, meanwhile,
connect computer to the same router, example of figure 2.