User's Manual

L SERIES IP CAMERA USER MANUAL
10
don’t set “local recording path” and launch recording directly, and then save recording file
to the folder, as figure 11.
Figure 11
3.3 Device web setting
3.3.1 Basic network settings
The user can also enter the Basic Network Settings to set the IP address except using
the search software “LSearch_en.exe”. See below Figure 12.
Figure 12
Remark: The router connected to camera need to enable DHCP when the user uses
“obtain IP from DHCP server”; the routers enable DHCP by default.
3.3.2 AP settings
Example of chapter 2.1, the user can directly connect to the camera by mobile phone
and laptop with WiFi. The label with default AP SSID was sticked to bottom of the
camera, the default password is 123456789. The user can change the SSID and
password, but the password must be 8 or above characters and digitals.
Figure 13
3.3.3 Wireless wifi settings
Please refer to chapter 2.2.