User's Manual

http://www.wansview.com
3.2 Interface of Equipment
Figure 2
1） Power Input Socket: Connect DC adaptor, its output should be 5V power
specification.
2） RJ45 Ethernet Socket: RJ45 Ethernet socket is 10/100M self-adjust. The
equipment can connect to all kinds of network equipments, such as hub, router,
switch, etc.
NOTE: Factory setting IP is 192.168.0.178, the http port is 80, the username is
admin, the password is 123456.
3） Audio Output Socket: Audio output socket is for line-out audio player, such as
headphone, speaker, etc.
4） RESET Button: reset button is on the bottom of the device, Press the RESET button
and hold on more than 10 seconds, the equipment will restart and recover to the
factory default settings.
6