User's Manual

IP CAMERA User Manual
5
is smart, easy and convenient to install in many sites.
 Infrared LED for night vision covers 5m area, to realize 24 hours monitoring.
 Support IR and color filter change automatically, no any color difference.
 It adopts the TCP/IP network protocols and has inner web server. Users can browse
video through IE and other browsers. Data is transferred through one port; it is easy
for user to do the network setting.
 Support 802.11b/g protocol, can build up wireless monitoring.
 Motion detection and alarm pin can be connected to external sensors to detect
environmental situation.
 Alarming record can be stored by email, FTP server. External alarm can be open
when detecting unusuality. It also sends alarm info to the alarm server.
 Support three level of user authority.
 Supports UPNP,
port forwarding automatically on the router.
 Support upgrading online.
 Manufacture attached a label at the bottom of each IP Camera, it include Device ID,
DDNS. When IP Camera is connected to the internet, this URL can be used to visit
the device.
 Manufacture provides free software, support Multi-view, Long time recording, video
replay etc.
3 Appearance and interface
3.1 Appearance
Figure 1
Note：
 Status Indicator: the green light is to show the status, when device running, Slow
flicker（one per 2 second），indicates the device is searching for network; flicker（one
or twice per second）, indicates the wired network connected; Frequent flicker（2~3
times per second）, indicates wireless network connected.