User's Manual

http://www.wansview.com
17
5.3.4 Alarm Time Setting
Figure 21
The device will trigger the alarm only during the armed time period.
Note: Please make sure your system time is correct before you set the alarm time period.
Please refer to 5.5.2 to set system time.
5.4 Advance Setting
5.4.1 User Management
Figure 22
There are 3 levels of user authorization.
 Administrator：”admin” has the highest authority. It can do any settings. Factory
default password: 123456
 User: user can only operate the device but can’t do any setting changes. The default
password is user
 Guest: User can view the video, but can’t operate the device. The default password
is guest
Note: Please change these 3 level passwords when your first use to ensure your safety.