User's Manual

User manual
7 / 23
Figure2
2.2.3. Mobile Phone Setting
Install the iSmartViewPro App in android phone or iPhone at first，Open the App, access to More
interface, select “One key configure Wi-Fi” and fill in Wi-Fi SSID and password, and then click configure
to finish the setting as Figure3.
Figure3
Tips:
 Before configuration, please power on the camera, after 5 minutes, you can configure the camera
(blue Wi-Fi indicator flash slowly),otherwise you can’t configure, and must power on the camera
again;
 Move mobile phone speaker to camera MIC, click Configure;（please confirm if the camera have
MIC, otherwise the configuration will be unsuccessfully)
 After configuring successfully, the blue Wi-Fi indicator will flash several times quickly, and then
connect to router automatically and the blue indicator is always on. You can click Configure several
times when the configuration is unsuccessfully.