User's Manual

4.2 Factory Setting
Press OK key to enter into the Factory Setting
window.
Select Yes button and press OK key to return to
the factory setting. All searched channels and set
information will be erased.
Select No button and press OK key to cancel this
operation, or press MENU or EXIT key to cancel
and exit.
1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select between AllCode and Dump. When users switch the
upgrade mode, Upgrade File will show the corresponding file according to the
table below:
4.3 Upgrade by USB
3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.
Upgrade Mode File feature
All code : File named as "*.abs"
Main Code: File named as *.bin
Radio back: File named as "*.m2v",
the picture will be used
as both radio back and
menu back
Default db: File named as "*.bin"
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
4.4 Common Interface
Press OK key to enter into the main menu.
You can know information about product
Ordering, Subscription Status, PPV Status,
Token Status and so on.
There are 2 types of CI: Conax access and Irdeto
access. Here we take Conax access for example.