User's Manual

MAIN MENU

5. Hot Key

Use the numeric keys (0-9) to input the number of the desired channel. If the

inputted number is beyond the valid channel number, system will "Invalid number”

and press OK key to close this message.

5.1 Number

Press CH+, CH- keys to change the channel up or down. If in the all satellites group,

you can select channel in all searched channels. If in the specific satellite, only can

select channel in the satellite group.

5.2 CH+/CH- (Channel Change)

During the viewing, you can press PAUSE key to stop the picture while the volume

continues. You can play the picture by pressing PAUSE key once again.

5.5 Pause

Press key to close the volume. You can press key once again to restore the

volume, or press VOL+,VOL- keys to open the volume.

5.4 Mute

Press VOL+,VOL- keys to change the volume. Press VOL- key to decrease the

volume by step 1, while press VOL+ keys to add the volume by step1.

5.3 Vol+/Vol-

1. During the viewing or listening, press OK key to

pop up the TV program list or the Radio program list.

2. Press CH+,CH- keys to select the channel up or

down, and then press OK key to play this channel in

full-screen.

3. Press VOL+,VOL- keys to select the satellite.

4. Press MENU or EXIT key to close this window.

5.8OK

5.6 Standby

1 .Press [Power] Key can enter the Standby state

2 .In Standby state, press [Power] Key again can call back the unit and go on play the

previous channel

3 .User can also disconnect the device s main power to end the Standby state.

In full screen, press [Page-/Page+] to change viewing group.

5.7 Page+/Page-