User's Manual

MAIN MENU

4.2 Load Factory Default

If you choose Yes , all the parameters of this receiver

will reset to the default value.

Note: Please use this function carefully.

When you choose the option of Load Factory

Default and press [OK] key, there will be a dialogue

for you to input the password. The default password

is 0000. If you input the correct password, you will

see a screen like beside.

4.3 Software Upgrade

In this function, we offer a upgrade service for users.

Press [EXIT] key to save the parameters and draw

back.

Press CH+,CH- key to select menu among all the

items.

Press [OK] key to enter the selected item.

4. Tools

When you enter Tools menu, you will see the screen like below.

It contains three sub-menus such as:

Load Factory Default, Software

Upgrade.

Receiver

Information,

Press CH+,CH- key to select menu among all the

items.

Press [OK] key to enter the selected item.

4.1 Receiver Information

When you enter Receiver Information menu, you

should see the screen like it displays on the right.

This screen displays receiver information.

You should press [EXIT] key to cancel this menu.

4.3.1 Upgrade By Air

This function can upgrade the software through signal

lines from the cable.

1 .Input the frequency value and download PID, and

select bandwidth.

2 .Then move the highlight to the start button and

press [Enter] key to begin to upgrade.