User's Manual

13
MAIN MENU
MAIN MENU
3.4 Timer Setting
When you enter the Sleep Timer you will see the
screen like besides
Sleep Timer can set the time when the system can
enter standby mode automatically.
You can use VOL+,VOL- keys to switch the parameter which offered in this item.
Then press the [OK] key to active it.
After you activate it, the option of remains will show the remaining time. This option
is only used to display but not be modified.
Press [EXIT] key to exit the current menu.
Press CH+,CH- keys to select menu among all the
items.
Press [OK] key to enter the selected item.
Program Timer contain Timer Number and Timer
Mode.
Timer Number: Press VOL+,VOL-keys ,you can
select between 1-8
Timer Mode:Press VOL+,VOL- keys ,you can
choose between On and Off.
3.5 Parental Control
New Password is used for revising password; you can press [OK] key firstly then
input the new password in this item by using number keys directly. After you filled in 4
digital numbers, the highlight will auto skip to Confirm Password and ask you to input
the new password again. If the password is correct, the screen will show up a
message of Change password successfully . After finish saving and draw back to
System Setup menu, the revising is complete.
Press [Exit] key to draw back from the Parental Lock menu.
When you choose the option of Parental Control
and press [OK] key, there will be a dialogue for you to
input the password. The default password is 0000. If
you input the correct password, you will see a screen
like beside.
U.S. TV rating / MPAA / C.E.L.R / C.F.L.R / Downloadable RRT: Blocks TV programs
that you or your family may not wish to watch, based on the rating scheme set.
Section 3.5.1 ,Section 3.5.2 , and section 3.5.3 will show you how to set the rating
menu.