User s’ Manual of SOUND BLASTER Pictures should be used only as reference.
Directory 1. Preface-----------------------------------------------------------------2 2. Accessories -----------------------------------------------------------2 3. Product introduction--------------------------------------------------2 4. Attentions------------------------------------------------------ -----2 5. Panel introduction ---------------------------------------- ---------3 6. Operational instructions---------------------------------------- -6 7.
1. Preface Dear users, Welcome to join the CKY family! Your buying of our products is much appreciated! For full use of your player, please read this manual carefully before use, so as to grasp connection methods and operational key points of this system. You will also find our various explorations in design, manufacturing process and operational humanization, all to meet your requirements. Please keep this manual well for future reference.
. Attentions First, thanks for your use of our digital audio products! Before use, please read this manual for correct use of this product. For better services, contents of this manual may change due to variation of product performance and functions without further notice.
1、SORUCE/ : short press to power on/switch functions, long press to power off. 2、VOL+:short/long press to increase volume. 3、VOL-:short/long press to decrease volume. 4、PAIR:short/long press to pair Bluetooth. 5、LINE IN:Jack for external audio input(specification:3.
control. Hold the remote control towards the device screen to operate various functions respectively on the remote control; 2, When the remote control is out of use for a long time and the batteries have no power for functions of the remote control, please detach the buckle as shown in the figure and remove the old batteries for new ones. Pay attention to the "+ / -" direction in replacement and pushed in the remote control with the direction shown in the figure to finish the replacement.
16、BASS–:short press to decrease BASS 17、 :short press for next song in Bluetooth 18、 :short press for music playback/pause in Bluetooth Power supply Mode: Get the DC plug of power adapter of the device into the DC 12 v socket of it, the other end of the power adapter connected to the grid. The power indicator of the device turns red, then short press “ ” button on the device or remote control can power on. 6.
After startup, use audio line with 3.5 mm plug to connect the external audio input to LINE IN jack of the device, the device will automatically switch to the LINE IN function model. Then connect an external audio source such as MP3 / CD to LINE IN jack on the device by audio line, you could start to listen to external audio music. (Please adjust the volume of an external audio source to moderate, and in playback mode).
"DOLBY *", "DTS", "THX" etc. If you can't confirm the format of audio signals, you can change to CD to play. If there is a audio output with CD, it means the equipment connection and setup is correct. If there is still no audio output, please consult a professional personnel or customer service.
3,Output power: L:5W R:5W 4,Operational frequency range: 2.4 GHz-2.480 GHz 5,Supporting Profiles: A2DP AVRCP GAVDP AVDTP 6,Speaker impedance: L 、R :4Ω The product specifications and design may change without further notice! 9. Simple trouble solutions Troubles pairing connection via Bluetooth cannot be completed Volume of playback via Bluetooth is small connection distance via Bluetooth is short connection via Bluetooth is right, sometimes staccato.
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.