Users’ Manual of Soundbar SR206C The picture is only provided for reference; please refer to the actual player.
Introduction ooo z Precautions for Use poo. 2 Functions of Keypads and Ports 3 Remote Control 4 Usage of Remote 5 Power Supply Mode... 5 SIAM «ocean 5 AUXIN coi 6 Bluetooth Connection and Pair 8 Precautions... 6 Cell Phones and Equipment Supported 7 FM/Radio Mode... 7 Fiber decoding Mode... vivid 7 Precautions ooh eee 7 USB or SD Mode ooo 7 EQ (Sound Effect) 8 MUTE (Sound Effect) IEEE, 8 Volume Control... 8 en 8 Product Specifications...
introduction Thanks for buying our new generation of multi-functional Soundbar combination audio system! This Soundbar combination audio system has various functions including perfect tone quality, high reliability and fashionable appearance as a masterly product. You are expected to share the excellent satisfaction launched by the digital era.
unctions of keypads and Ports There are 5 keypads and 7 jacks defined as below: 1. Press this button shortly for startup shut-down 2. =n ww: Press this button for a long time for increase the volume and shortly for next music 3. BV % Press this button shortly for Pause/ Play; and press this button for more than 3 seconds for Bluetooth Pair key 4, cy oe; Frogs this button for a long time for reduce the volume and shortly for last music 5, (+ Press this button shortly to switch over different functions 6.
4. AUX R: external right track sound source input port 8. AUX L: external left track sound source input port emote Control bu 1. oh. Press this button shortly for startup/ power-off 2. %® Bluetooth mode key 3. AUX: External sound source input mode key 4. ODP: Fiber decoding feature mode key La . 44 Last music key a . = Volume key 7. —: Treble down key 8 —: Bass down key 0. H Mute key 10+ FM: EM radio mode key 11. =D Volume + 12.
18. BASS: Bass sik e-prnl icon ase of Remote Controller 1. Before using the remote controller, please draw out the PVC insulating strip inside the battery cartridge so that the battery inside it will supply power for the remote controller. Hold the remote controller and aim it at the host display for all functions shown on the remote controller; 2.
Bluetooth Connection and Pair Made Press 3 button on the remote controller or “(<7 button on the player to switch over to Bluetooth function and enter into this status from two states during aux status. 1. Directly enter into SEARCH mode after startup, 2. Press “BH button for more than 3 seconds and the blue lamp will flicker quickly 10 infer into PAIR status immediately; 1}, Put the cell phone within 3 meters; 2}.
Gladiola ¥ Press FM button on the remote controller or button on the player to switch over to FM radio function in Bluetooth BT status and connect FM antenna, the radio frequency range is from 87.5 to 108.0MHz and the player can save 20 radio stations. A.
2. When there is no voice output from the connected device, please make sure the optical cable is connected well and make sure if the optical terminal of your audio output information device can give out the red light. If no, please turn on the fiber output port of our device and set it to PCM output, 3. When your audio output device can issue the red light, but it cannot play normally, please make sure vou have set it to POM output state.
(Sound Effect) Press button of “TREBLE” or “BASS on the remote controller shortly in any status to adjust Treble/ Bass sound effects, the maximum level is 6 and minimum level is -6 and the default level is 0. (Sound Effect Press “e517 on the remote controller shortly m any status and enter mto the Mute status, the display screen will flicker and press this button shortly again to resume the voice. u troll A.
6. External power adapter: Input: Output: 7. EQ adjustment: Treble and bass (bass channel volume may be adjusted separately) § Maximum output power: THD=10% 9. Standard distortion: <4 54 10. Signal-to-noise ratio {not weighted). >40dB 11. Fiber decoding format: PCM 12. Bluetooth specifications: Bluetooth 2. PEDRO 13. Bluetooth Output power: Output Level 2 and 10 meters as the maximum connecting distance 14. Operating frequency range: 2.402GHz-2 480GHz unlicensed ISM band 15.
NOTE: ‘This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
