User's Manual of Bluetooth Speaker BC20N The picture is for reference only, if it differs from the actual machine, subject to the actual machine! Please keep this manual properly; any updates are subject to no prior notice!
Table of Contents Introduction .................................................................................................2 Notes ...........................................................................................................2 Definition of Buttons and Jacks ...................................................................3 Remote control function ..............................................................................4 How to use remote control.....................................
Introduction This product is a kind of portable Bluetooth stereo which supports music player, it adopts digital signal processing technology and is applicable in different environment such as office, home, it can realize wireless connection with the majority of Bluetooth-supporting devices and mobile phones to play music with high quality from the devices and mobile phones.
Warning 1. Be careful to avoid water, the product should not be exposed to water drips or splashes, the body can not be placed on with articles filled with liquid such as vase to avoid accidents. 2. If using power plug as disconnecting device, the disconnecting device should be easy to operate. Definition of Buttons and Jacks There are 4 buttons and 3 jacks, which are defined as follows: 1. : short press Power on/off button 2.
1. DC 12V: DC 12V power supply jack 2. USB(1.0A): charging jack of a variety of mobile phones and iPod / iPhone models 3. AUX IN: external audio source input jack (3.5mm jack) Remote control function 1. : short press Power on/off button 2. : short press to decrease the volume; long press to quickly decrease the volume 3. : short press to increase the volume; long press to quickly increase the volume 4.
remote control, hold the remote control and face it to the display screen of the host so as to effect each function of the remote control; 2.
2. If the pairing has been successfully completed before, the blue LED light flashes once every 1 second, the machine goes into the search mode, the Bluetooth automatically connects with devices and mobile phones used last time. 3. Enter into the search mode, the Bluetooth will automatically connect with devices and mobile phones used last time, if the connection is successful, it will enter into the connection mode; if fails to connect, the machine will go into the standby mode.
Remarks: 1. When starting up the machine in the Bluetooth mode, if it is not connected to Bluetooth device after 120 seconds, the machine will automatically shut down and go into the standby mode. 2. If the pairing is successful, the machine will enter the connection mode. 3. If the paired devices exceed the maximum capacity (maximum 8 units), the machine will automatically exclude the first device memorized.
In the play mode of Bluetooth music, you can: Short press or long press " " or " " button to turn up/down the sound. Press " " button to play/pause operation. NFC Connection Mode Please exit the bluetooth connection from your mobile phones before using NFC connection, then keep the NFC “ON” from your mobile phone, after that, the user put the backside of mobile phone on the right top of unit which is the area with NFC sensor, the mobile phone can not be taken away until the NFC connection is done.
AUX IN mode As long as you use AUX IN line to connect with AUX IN Jack, the system will automatically suspend the Bluetooth, the blue LED will go off and go into the AUX IN mode, you can short press or long press " " or " " button to turn up/down the sound. After you pull the AUX IN line completely out of the AUX IN Jack, the system will reenter the Bluetooth search mode to search for the last device connected.
Note: In addition to mobile phones mentioned above, it also supports devices with Bluetooth music players in theory. Product Specification Bluetooth Specification: Bluetooth 2.1 + EDR Output Power: Output Level 2, the maximum connection distance of 10 m Power Adapter: 12V/3A Range of Operating Frequency: 2.402GHz ~ 2.480GHz unlicensed ISM band Profiles Supported: HSP, HFP 1.5, A2DP and AVRCP Dimension: length 420 × width 160 × height 200 (mm) Weight: about 3.
Warning： changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 5mm the radiator your body.
