User's Manual

8
End a call:
In hands free state, press the “ ” button the end a call and return to music
playback mode.
Reject a call:
When there is an incoming call, press and hold the “ ” button for more
than 3 seconds to reject the call.
● AUX IN mode:
When the device is powered on, if you connect a 3.5mm AUX audio cable to the
AUX IN port on the device, it will switch to AUX IN mode. In such case, connect
the audio cable of the external audio source such as MP3/CD to the AUX IN port
of the device to play the music on it (please properly adjust the volume of the
external audio source and start playing on the audio source).
MICRO TF/SD playback mode:
When the device is powered on and under any mode, if you insert a TF/SD card
into the device, it will play the music stored in the card automatically. Press the
“
” button to play/pause; press the “ / ” or “ / ” button to
select previous/next track.
Volume adjustment:
9
When the device is powered on, under any playback mode, press and hold the
“
/ ” button to decrease value; press and hold the “ / ” button to
increase value.
Color lamp mode switch function:
When the device is playing music, each time you press the “ ” button on the
device, the color of the lamp will change. The single color lamp can switch
among five different colors including: red, yellow, green, blue and purpose; and
five different flashing modes including: compress mode, flow mode, stretch mode,
music frequency mode and firework mode. The user can press the “
” button on
the device to select any mode according to their personal references to enjoy a
wonderful dynamic life.
Function switch mode:
A. When no SD/TF card is inserted and no AUX cable is connected, you cannot
switch function by pressing the “
” button and it will remain in Bluetooth
mode only.
B. When a SD/TF card is inserted or an AUX cable is connected, press the “
”
button to switch modes among: “Bluetooth”→“AUX IN”→“SD/TF card”.
C. Under any playback mode, if a SD/TF card is inserted or an AUX cable is
connected, the device will switch to the last inserted or connected function.
Power off:
When the device is on, press and hold the “ ” button the turn off the device to
standby mode, or push the “OFF⁄ON” switch to the “OFF” position to completely
power off the device.