User's Manual

GET LISTENINGGET CONNECTED
3-2 PREPARE YOUR SPEAKER
FOR
PAIRING
1.Press and hold the POWER switch for at least 3 seconds.
2.
Wait for the LED LIGHT to flash BLUE.
You will hear a prompt indicating it is ready to pair.
3-3 PREPARE YOUR PHONE OR DEVICE
Turn on Bluetooth.
ON
AN IPHONE®, IPOD®, OR IPAD®
Go to SETTINGS > GENERA
L > and enable BLUETOOTH
ON
ANDROID®,
Go to SETTINGS >CONNECTIONS> and enable BLUE
TOOTH
ON A BLACKBER
RY®
Go to SETTINGS/OPTIONS >BLUE
TOOTH and enable
BLUE
TOOTH
3-4 MAKE THE CONNECTION
Go to your device’s Bluetooth settings.
ADD, SEARCH or SCAN FOR DEVICE
S
When “NAKAMICHI BTSP10” appears, select it
.
IF
ASKED FOR A PASSCODE
Enter “0000
”
When pairing is successful, you will hear a tone and the LED
LIGH
T will turn BLUE.
This is a one-time event per device.
To pair your NAKAMICHI
Speaker to another device, repeat steps 3.2 to 3.4
.
3-5 PLUG & PLAY
No Bluetooth? Connect via 3.5mm Aux input.
Connect the 3.5mm
Aux-in cable to the device and the LED
LIGH
T will turn GREEN.
Play audio from any device with a 3.5mm audio jack or audio
output
.
When BC161 Speaker connects, via 3.5mm
stereo input mode, the speake
r’s control panel functions such as
MUSIC PL
AY/ PAUSE and TRACK CONTROLS will not work.
These functions can only be controlled from your audio source
.
7 8
4-1 GET THE BEST SOUND
For best listening results, make sure your BC161 Speaker is
resting on its base and speaker grill facing upwards. Peel o
ff the
protective film from its base before use
.
When connected wirelessly via Bluetooth, it
’s best to maximize the
volume on your phone/device and to control volume use the
speake
r.
When connected via 3.5mm stereo input, your phone/device may
distort the audio signal if turned up too loud.
4-2 CONNECTION PRIORITY
Incoming and outgoing calls will always take precedence over
audio playback when connected via Bluetooth.
Audio content via
3.5mm stereo input will override wireless audio via Bluetooth
.