User's Manual

POWER UP GET CONNECTED
FOR A FULL CHARGE
Plug NAKAMICHI BTSP10 Speaker into your wall charger or
computer via micro USB cable.
WHEN BATTERY IS LOW
The LED LIGHT flashes RED.
WHEN BATTERY IS CHARGING
The LED LIGHT illuminates RED.
WHEN FULLY CHARGED
The LED LIGHT will turn OFF.
NOTE:
For best performance, charge the device before using.
It takes 3 hours to give your speaker an 80% charge. A full
charge takes approximately 4 - 5 hours.
5 6
CONNECTION OPTIONS
Connect speaker wirelessly via Bluetooth or 3.5mm stereo input.
3-1 CONNECT WIRELESSLY
Your NAKAMICHI Speaker can wirelessly stream audio from any
Bluetooth device within 33 feet.