User Manual BC161 BLUE TOOTH SPEAKER TM
WELCOME CONNECT TO BC161 Speaker Thank you for purchasing BC161 portable Bluetooth Speaker. BC161 portable Bluetooth Speaker delivers impactful wireless audio without the hassle of cables and docking stations. It’s the perfect companion to any phone, music player, tablet or laptop! OR BLUETOOTH (Wireless audio) 3.
CONTENTS BC161 BLUE TOOTH SPEAKER ANATOMY IMPORTANT SAFETY NOTE POWER UP GET CONNECTED GET LISTENING TROUBLESHOOTING SPECIFICATIONS SAFETY INFORMATION
hhfo BC161 Speaker IMPORTANT SAFETY NOTE For best results, fully charge your BC161 Speaker before use. POWER SWITCH Press and Hold this button for 3 Seconds to turn on the device. MUSIC PLAY/ MUSIC PAUSE BUTTON LED Light Indicator Play/Pause/Call Pick Up Use this button to control music play or pause. BLUETOOTH PAIRING RESET Volume Increase Press and Hold the PLAY/PAUSE button for 5 seconds to reset the Bluetooth pairing.
POWER UP GET CONNECTED FOR A FULL CHARGE Plug NAKAMICHI BTSP10 Speaker into your wall charger or computer via micro USB cable. CONNECTION OPTIONS 3-1 CONNECT WIRELESSLY Connect speaker wirelessly via Bluetooth or 3.5mm stereo input. WHEN BATTERY IS LOW The LED LIGHT flashes RED. WHEN BATTERY IS CHARGING The LED LIGHT illuminates RED. WHEN FULLY CHARGED The LED LIGHT will turn OFF. NOTE: For best performance, charge the device before using. It takes 3 hours to give your speaker an 80% charge.
GET CONNECTED GET LISTENING 3-2 PREPARE YOUR SPEAKER FOR PAIRING ON A BLACKBERRY® Go to SETTINGS/OPTIONS >BLUETOOTH and enable BLUETOOTH 1.Press and hold the POWER switch for at least 3 seconds. 2. Wait for the LED LIGHT to flash BLUE. You will hear a prompt indicating it is ready to pair. 3-4 MAKE THE CONNECTION 3-3 PREPARE YOUR PHONE OR DEVICE ADD, SEARCH or SCAN FOR DEVICES When “NAKAMICHI BTSP10” appears, select it. Go to your device’s Bluetooth settings. Turn on Bluetooth.
H TROUBLESHOOTING SPECIFICATIONS TROUBLESHOOTING FREQUENCY RESPONSE: 100 Hz – 20,000 Hz SIGNAL TO NOISE RATIO: ≥60dB SPEAKER DIAMETER: 1.55” MAXIMUM POWER OUTPUT: 3W BLUETOOTH: 3.0 CHARGING TIME: 4 – 5 Hours SIZE: 3.1” x 2.9” x 3.1” WEIGHT: 10.2ounces 4. EXPERIENCING SIGNAL LOSS OR DROPOUTS VIA BLUETOOTH? 1. HEARING DISTORTION A. Lower the volume on your NAKAMICHI Speaker and/or phone/device. (See section 4.1 GET THE BEST SOUND) B. Make sure it’s charged.
SAFETY INFORMATION WARNING • Clean the speaker only with a soft, dry cloth. • Do not expose your speaker to extremely high or low temperatures. • Do not leave your speaker in direct sunlight for extended periods of time. • Do not leave your speaker near open flames such as cooking burners, candles, or fireplaces. • Do not block any ventilation openings. Please read these safety warnings and cautions carefully to ensure your personal safety and prevent property damage.
CAUTION FCC STATEMENT • Dispose of the speaker and battery in accordance with local regulations. Do not dispose of the battery with regular household waste. • Do not use abrasive cleaners on your NAKAMICHI Speaker because this could cause scratches and damage. • Do not bring your speaker in to contact with any sharp objects because this could cause scratches and damage. • Do not insert anything into your speaker unless otherwise specified in the user instructions. This may damage the internal components.
WOW TECHNOLOGIES LIMITED WARRANTY (U.S. and CANADA) WoW Technologies warrants this product against defects in materials or workmanship, under normal use, in accordance with the specifications and warnings, for a period of 12 months from the original date of purchase of the product. Pursuant to this Limited Warranty, WoW Technologies will, at its option (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product.