User's Manual
10
Charging a Device
1. Power on the unit using
the Power button.
2. Using a USB charging cable
(included), connect one end to
the device and the other to one of
the two USB Ports on the unit.
Refer to the user’s manual for your
specic device for manufacturers
required charging amperage
before charging your device.
3. The device will now charge.
Up to two devices can be
charged at once.
Note: When using an iPod, iPhone
or iPad, use the USB cable that
was included with your device.
Using the Speakerphone
1. Follow the instructions in
Pairing a Bluetooth Device.
2. When a call is received, a ringtone
will sound through the speakers.
3. Press the Speakerphone button
to accept the call or accept the
call with the native controls
on the connected device.
4. To reject the call, press and hold the
Speakerphone button over 3 seconds
or reject the call using the native
controls on the connected device.
5. The incoming call received
through the device will now be
heard through the speakers.
6. To end the call, press the
Speakerphone button or end
the call using the native controls
on the connected device.
Using Bluetooth and Charging
Playing Audio Wirelessly
1. Follow the instructions for
Pairing a Bluetooth Device.
2. Use the native controls on
the connected Bluetooth
Device to select a track.
3. To play, pause or skip the selected
track, use the native controls on the
connected Bluetooth Device or press
the Pair/Play/Pause or Skip buttons.
4. Audio played through the connected
Bluetooth device will now be
heard through the speakers.