User's Manual

10
9. Guidance on Simple Troubleshooting
Failure Resolutions
Bluetooth pair
and connection
fail
Other cell phone or equipment has been connected before
connection, and has not left yet and Bluetooth cannot be switched
off. When connection feature is employed again, the Bluetooth
unit will automatically search for this Bluetooth equipment for
connection. First turn off the Bluetooth feature of Bluetooth
equipment and the next Bluetooth equipment can search, pair and
connect normally.
The indicator
lamp does not
turn on and the
Bluetooth unit
is not available
Bluetooth unit has not operated for a long time, and may come
into dormant state, then press the PAIR/ Play button on the unit
for a longer time to rouse it.
Low Bluetooth
volume
1. After the cell phone and Bluetooth unit are connected, the
Bluetooth unit volume is not put at the maximum level, and in
level output as default, please tune up the cell phone output
volume. 2. Bluetooth unit has low output volume.
Short Bluetooth
connection
distance
There is a barrier between the cell phone and Bluetooth, please
clear it away.
Bluetooth may
be normally
connected and
played, but
sometimes, there
is interrupted
1. There is a barrier between the cell phone and Bluetooth, please
clear it away.
2. The distance between the Bluetooth unit and connected cell
phone is too far away, out of normal connection range. Please
put them nearer.
No voice after
Bluetooth is
connected
The audio feature of Bluetooth unit is not activated after the
Bluetooth unit is connected to the cell phone, please turn on the
output volume of cell phone.