Specifications
0VUMJOF
1SPEVDUT'FBUVSFT #MVFUPPUI4QFDJDBUJPOT 4BGFUZ"OE.BJOUFOBODF $PNNPOQSPCMFNTBOE4PMVUJPOT
We thank you for choosing the ultra long standby
mini wireless stereo Bluetooth headset.
The headset has a simple and fashionable
appearance, with multi-functional combination
and high compatibility,
it will let you really experience the fun of radio
calls and music! It's the best partner for your
office, driving, and outdoor sports.
The whole headset is composed of two parts:
“intelligent headset” and “intelligent charging
storehouse”.
It is the perfect partner of smart phone. It's both a
mini headset and a car headset, and can also be
used as an emergency mobile power, mini and
portable, and there is no need to plug the
earphone into the ear, and can keep full power at
all times.
Earmuffs: Small . Large
User Mamual
Pairing
Attentions
Switching voice prompt
Single earbud connection
Double earbud connection
Earbuds charging
Charging of charging bin
Warning:
1.
Take out of two earphones from the charging case, and the
binaural prompt tone are "power on". At this time both
earphones are paired with TWS. After pairing success, the
main earphone will flash red light fastly, the auxiliary e
arphone will flash blue light slowly, both earphones prompt
voice is "pairing successful connected". After a few seconds,
the main earphone will jump to the red and blue light
alternately flashing, the prompt voice is "pairing", means TWS
earphones are searching Bluetooth device, please open the
cell phone or other device’s Bluetooth to connect.
2.Open your phone or other devices. mobile phone to search
“A5” and pair. When the phone connected successfully. The
earbuds will flash blue light and will hear the prompt voice
“pairing successful second device is connected”
Note: if there is no above operations to take out the earphones
from the charging case, you need to long press the earphones
to turn off. Then long press the switch keys of two earphones to
the red and blue light alternately flashing, then release, now both
earphones are paired with TWS. After the pairing success, the
main earphone will flash red light fastly, the auxiliary earphone
will flash blue light slowly, the both earphones prompt voice are
"pairing successful connected ". After a few seconds, the main
earphone will jump to the red and blue light alternately flashing,
the prompt voice is “pairing”, means TWS earphones are
searchnig Bluetooth device, please open the cell phone or other
device’s Bluetooth to connect.
3.The earbuds tum off when battery is low. After it is
recharged. it will automatically connect back to the last paired
Bluetooth device.
4. If has been connected to mobile phone before, but mobile
Bluetooth has cleared the pairing history, please press both
headset key still the blue light flash slowly and release the keys
(can also press one headset until the blue light flash slowly and
release the key, and then press another headset until the blue
light flash slowly and release the key), after a few seconds, the
main headset will jump to alternately flash for red and blue
lights, at this time, open the mobile Bluetooth for connection.
Turn on: both of left and right earphones will automatically turn
on when you take out them from the charging case .
Standby: The Blue light flashes every 4 seconds.
Power off: put earbuds into the charging bin, or long press the
MFB button unitl the red light flashes, they would tum off
automatically.
Connect: Blue light flashes once every 4 seconds.
Incoming call: the auxiliary earphone’s blue light flashes every
4 seconds, and the main earphone’s red light flashes every 2
seconds.
Talking: Blue light flashes once every 4 seconds.
Music: Blue light flashes once every 4 seconds.
Disconnect links: Single headset (alternate flash with red and
blue lights). (TWS) main headset with alternate flash for red
and blue lights, and blue light flashes once every 4 seconds for
supplementary headset.
Answer the phone: Click MFB button once while incoming call.
Reject Call: Long press MFB button once while incomingcall.
Recallin
g the last call: Click MFB button twice to redial the last
call.
Re-connection.lt will be connected the paired mobile phone
automatically while power on.(thepremise is that the Bluetooth
on the phone is open, and tht Bluetooth does not clear the
matching record with the device)
Firstly, if you have paired earphones (TWS pairing), you can
only take 2 earphones from the charging case.
Secondly, if paired unsuccessfully (TWS pairing), please take
the earphones (two) out of the charging case, and then long
press the switch key to shutdown, then long press the switch
key to the red and blue light alternately flashing, release your
hands after see both earphones’se red light flashing, and turn
off. (This option is to clear the history pairing records). Now you
can operate TWS pairing as usual.
Third, in TWS mode, any of the headsets is with low battery,
both headsets will turn off automatically. Both headsets will turn
off automatically if Bluetooth device is not connected within 5
minutes.
Fourth, if one headset has no sound when mobile phone is
connected: 1. Please adjust the mobile phone volume control
key (in particular, iPhone equipment). 2. Please clear off the
mobile Bluetooth, and then turn on the mobile Bluetooth to pair
for both headsets.
1.The standard data cable is inserted into the charging
bin(DC5V),and other side of the cable connect the qualified
charger to charge the charging bin.
2.When the charging bin is charged fully, the red light would
flash.
3. When the charging bin is full of electricity, the red light would
keep flashing. Charging bin`s charging time is 10hour. The blue
light would flash when taking off the charging cable .
4.When you put in earphone or connect to mobile phones or other
devices, the charging case will automatically charge. At this point,
the power indicator is blue light long flashing and the earphone’s
indicator is red lihgt long flashing.
When the earphones are full of electricity, the charging case will
drain for 32 seconds and then turn off.
Please read below suggestions in order to helping prolong the
product lifespan and clearly understand the warranty clauses.
·Keep the product dry, do not put it in humid circumstanceto
avoid short circuit
·Do not expose it to the sun or high heat. High heating will
short lifespan of electronic components. damage battery and
deform some plastic parts.
·Do not put it in cold circumstance to avoid damage to PCB
board.
·Do not attempt to tale apart the product, especially
non-professionals.
·Do not fall, vibrate strongly. Strike with hard objects, to avoid
damage to inner electronic circuit.
·Do not use high chemical products. detergent to clean the
Item.
·Do not scratch the surface with sharp items to avert
damagingthe case and appearance .
·Do not make it charging than 10 hours continuously for the
sake of lifespan.
Statement: In order to improve product performance we will
upgrade products , the content may change without notice, pls
forgivel Thankyou for your purchase.
1. 2 in 2 Bluetooth earbuds with power bank, long standby time.
2. CVC noise reduction, HD sound & call.
3. Built in 2200mAh power bank.
4. V5.0 chip, low power consumption, super compatibility.
5. Hands-free function.
6 Professional over-current protection. Short circuit protection
function, no damage to equipment.
Bluetooth Version:V5.0
Bluetooth Support: HSP HFP A2DP AVRCP
Stand-by Time: 1000H
Talk Time: 4H
Music Play Time: 3.5H
Charging Time : 1H
Charging Voltage: DC 5V
Frequency Range: 2.402G----2.480G
Ambient Temperature: -20/+60℃
Transmission Distance:10m
Earbuds Batter y Capacity: 55mAh/3.7V
Charging Case Battery Capacity: 2200mAh/3.7V
Driver Specification
Driver Unit : 8mm
Sensitivity: 97dB±3Db
,PSHGDQFHȍ
Frequency Response: 100-20000HZ
Use approved charger as possible, using other types.Of
charger may violate the equipment`s approval or warranty, and
may draw to dangerous.
Only charging cable with 3C certification could be put into
boxes as accessory when earbuds be deliveredfrom factory.
When the earbuds were tumed off, long press MFB button until
the red & blue lights flash. And then double-click MFB buttonto
Chinese/English voice prompt switch.
Charging Products Features Products FeaturesBluetooth Specifications
1.When the headset is charging, if the red light is on, the
headset is in full electricity, or enough electricity if red light off
and blue light on (the headset is full of electricity for about 0.5
hours, according to the indicator.)
2.When the connected headset is flashing with red light, it
indicates that the amount of electricity in the headset is
insufficient. If will turn off automatically if continues to work,
please charge it in time at this point (the headsets are placed in
the charging storehouse), to ensure the performance of the
headsets.
3.The earbuds uses magnetic absorption intelligent charging.
the earbuds would be automatically charged when put them
into the charging bin.(if no red light. please reset)
4.Fully charged earbuds could support 3---4 hours of talking
time ,100—150 hours of standby time .However, the actual
taling time and standby time maybe different with the different
mobile connected,as well as the different settings , usage and
environment.
2. Tum on your phone Bluetooth device to search “A5” and
connect. when the phone connected successfully, the blue
light will flash and will hear the prompt voice “pairing
successful connected”.
1.
Take one earphone only from the charging case, and press the
switch key to the red light long flashing and then move your
hands away to turn off, and then press the switch key to the red
and blue light alternately flashing with a prompt voice "pairing".
Problem
description
Cannot be
switched
on
Cannot be
charged
Cause for
the problem
$PNQMFUFMZFYIBVTUJPO
PGUIFCBUUFSZ
5IFDIBSHJOHQMVHJT
OPUQMVHHFEJOQSPQF
SMZ
5IFIFBETFUEJEOPU
FOUFSUIFQBJSJOHTUBUF
5IFIFBETFUEJEOPU
FOUFSUPCFTFBSDIFE
.PCJMF#MVFUPPUIBQQ
MJDBUJPOFSSPS
5IFIFBETFUJTXJUI
MPXFMFDUSJDJUZ
*OUFSGFSFODFPG#MVFUP
PUITJHOBM
-POHQSFTTQPXFSLFZ
GPSUPPTIPSUPGUJNF
5IFIFBETFUFOUFSUIFTUBUFUP
CFTFBSDIFE
5VSOPUIFNPCJMF#MVFUPPUI
BOESFPQFOUIFQBJSJOH
$IBSHFUIFIFBETFU
%POPUVTFJOBOPJTZFOWJSPO
NFOUPSBEFOTFFMFDUSPNBHO
FUJDXBWFQMBDF
6OUJMUIFSFEBOECMVFMJHIUT
BTI
1MVHUIFDIBSHJOHQMVHBHBJO
-POHQSFTTUIFLFZTFDPOET
UPSFTUBSU
8JUIGVMMPGFMFDUSJDJUZGPSDIBS
HJOHTUPSFIPVTF
Solution
Cannot be
searched
or
failure par-
ing
Poor call
quality
$