User's Manual

found, refer to the vehicle’s service manual for the
location.
2. Plug the diagnostic connector into the vehicle’s DLC
socket (It is suggested to use the OBD 2 extension
cable to connect VCI connector and DLC socket.). For
non-16PIN DLC socket, please select the
corresponding non-16 pin connector adapter, then
plug the non-16pin end of the adapter into the DLC
socket, and then connect the standard 16pinend VCI
connector.
2 DIAGNOSIS FLOWCHAT
For new users, please follow the 3.1 to get familiar
with and start using this device.
Connect the diagnostic connector –>user
registration–>user login–>download or upgrade
software–>select function or vehicle type–>proceed
diagnosis