User's Manual

2) Power on the device;

Take out the shell by pressing the shell button(see the overview figure); Plug in the DC adapter,

Power on the device ,the Wi-Fi indicator will flashes in red rapidly(see the following figure);

3) Add Device Through Network

Launch the witgarage app, follow the application’s instruction to start to add the device;

Note: (1) Network must be 2.4GHz band)

(2) If Wi-Fi indicator flashes in red rapidly, please select smart mode on the app;

(3) If Wi-Fi indicator flashes in red slowly, please select AP mode on the app;

The light will be solid green after you add the device successfully(see the following figure);

2. Add sensor to controller

1) Press and hold the sensor 1 button (see the overview figure)until sensor 1 indicator flashes in

yellow;

2) Flip the toggle switch (see the overview figure)to 1; the controller will add sensor automatically; the

sensor 1 indicator will be solid yellow;